STANDARD GRADES: 48 - 115 g/m²

Self-trimming requirement

• cumulative reel width 2100 - 2360 mm

Available widths

• 420 mm to 2360 mm (17” to 93”)
• narrower widths available on agreement

Available lengths

• 7000 m / 10000 m / 12000 m / 15000 m
  (7655 yd / 10936 yd / 13123 yd / 16404 yd)

• other lengths available on agreement

HIGH GRAMMAGE GRADES: 140 - 235 g/m²

Reel length

	Length, m	Diameter, cm	Length, m	Diameter, cm
11-series	7000	115	3500	82
15-series	5000	108	2500	75
18-series	4000	104	2000	73
20 series	3500	106	1750	75

Reel width

	Width, mm
Mother reel	1820
Production without rewinding	1800 - 1820
Minimum reel width without rewinding	330
Rewinding	< 330
Stock reels	1020
	800
Orders from production: cumulative width	1800 - 1820
Orders from stock: cumulative width	1020 or 800

 

REEL SPECIFICATION

Width

• JTK reel width specification:
  nominal width +/- 1 mm

Length

• Content of paper in jumbo roll equals to:
  nominal length (m) - 0 / + 20 m

Cores

• 76 mm (3”) standard core
• 70 mm / 152 mm (6”) cores available on agreement

Splicing

• Splices are joined by using black paper tape. The distance between splices is a minimum of 500 m the beginning and the end of the roll included. The maximum allowed number of splices in one jumbo roll is two. The amount of splices is shown on the jumbo roll label.

Markings on the edge of the roll

One edge of the roll is stamped with

• an arrow indicating the unwinding direction
• paper grade

Packing and palletizing

Each jumbo roll is wrapped in kraft paper and placed on a wooden pallet covered with a corrugated board including a PE film inside the structure for increased moisture protection. The roll is wrapped on the pallet with polyethylene film and a wooden lid is strapped on to the top of the roll with two plastic bands.